STOP 0x0000007b

10/11/2010 admin News, Windows, 0

After you restart the destination computer, you may experience the following symptoms:

• You receive one of the following Stop error messages:
  • Stop 0x0000007B Inaccessible_Boot_Device
  • STOP: 0x00000079 Hal_Mismatch
• The computer stops responding at startup.
• The computer that is running Windows Server 2008 crashes on startup. This occurs when the source HAL and the target HAL do not match.
• The computer spontaneously restarts when you receive the following message on a black screen early in the restart process:
  Starting Windows 2000
• You cannot configure your display settings.
• The network adapter does not function correctly.

To resolve issues with the display settings or with a network adapter, remove the graphics adapter or the network adapter from Device Manager, and then restart the computer. Windows will redetect the device and possibly prompt you for drivers.

To resolve the problem when the source HAL and the target HAL under Windows Server 2008, follow these steps:

1. Click Start, right-click Command Prompt, and then click Run as administrator.
2. Run the following command: bcdedit /set GUID_identifier detecthal yes

To resolve the Stop error or the problem where a computer stops responding, perform an in-place upgrade of Windows.

Smokeping – отслеживание доступности веб-сайта FreeBSD. Portupgrade